Fluke 87V Review

Multimeters from Fluke are widely considered to be the gold standard, and the 87v is one of the company’s top models. The 87V is often regarded as the standard meter for industrial electricians. Now, what about the HVAC technician? Since its inception, Fluke has been widely regarded as one of the leading providers of digital multimeters owing to their products’ consistency in quality. However, There are many other multimeters available, but the 87V is one of the finest for the reasons listed above.

The 83V, 87V, and 88V are all multimeters of Fluke’s 80 series.

The 83V is quite similar to the 87V and shares many of its functions; but, unlike the 87V, it is not a true RMS meter and suffers from less precise temperature readings and worse display resolution. It’s often compared to the 87V, but at a lower price point. The 88V is often referred to as an automotive multimeter because to its expanded measurement ranges and functionality in areas like RPM, Pulse Width, and Peak Min/Max, all of which are useful in the automobile sector. However, In the legendary 80 series, the 87V represents the pinnacle of quality. It’s one of the most popular choices among professionals and one of Flukes’ best-selling multimeters. Perfect for testing the integrity of delicate electrical parts and systems, this multimeter is also reliable enough to be considered among the finest on the market.

Features That Matter Most to HVAC Technicians

Taking the Temperature –328.0 °F – 1994.0 °F

RMS (root-mean-square) voltage and current in an alternating current system 

AC/DC Voltage Testing to 1000 Volts

Up to 50 M Ohms of Resistance

Analyzing the Continuity of a Circuit and Testing Diodes

Maximum 10,000 °F capacitance

Ten Amps Constant, Twenty Amps for Thirty Seconds

Temperature and Flame Sensors in Microamperes

Results in milliamps ( Great for 4-20 mA signals )

Elective or Mandatory Ranging

Measurements of VFDs that are accurate thanks to the use of a low-pass filter

The precision within 5% in DC

Lighted screen with a large size

The screen may switch between a 6000-count and a 2000-count resolution.

If the probes are connected to the wrong terminals, a warning will appear.

For rapidly fluctuating signals, an analog bar graph, CAT-III (up to 1000V) and CAT-IV ratings for safety (to 600V), Min/Max/Average, Guaranteed for the rest of time.

Let’s Take a Peek Inside That Box

Industrial Multimeter, Fluke 87V, 9-Volt battery, Test Connectors TL75, Spring-loaded Alligator Clamps, Model AC175, Lead storage holster made of rubber, Thermometric sensor (80BK), Detailed Guide.

Analysis of the Functions of the Fluke 87V

Although they have been around for almost 30 years, the Fluke 80 series is still regarded as one of the best families for pinpoint electrical troubleshooting. The Fluke 87V may be described as an “industrial digital multimeter,” but it’s perfectly at home in the realms of HVAC, electronics repair, and residential usage. However, HVAC technicians in the modern business world will be amazed by the installation of the low-pass filter. All of the drive controller’s high-frequency noise is canceled out by the low pass filter in the meter. Depending on the clamp you use with your 87V, you may use one of many techniques to calculate motor speed or frequency.


Not many multimeters provide simultaneous micro-amp and milli-amp measurement capabilities, but this one does. The HVAC technician may quickly and easily perform routine maintenance and troubleshooting on the flame rectification system thanks to the instrument’s 0.1 A resolution for measuring micro-amps. An essential skill for every technician in the business sector is the capacity to decode milliamp signals. The 4-20 milliampere range is widely used in control systems and building automation. However, A meter that can’t interpret these signals will make your work considerably harder. No HVAC technician should be without a multimeter that has a built-in thermometer. 

Even though many people are switching to digital pressure/temperature probes. The ability to obtain readings on bigger pipe systems using a bead or touch probe is a useful feature. It is important to have the probe lead warning, especially if you have never used a meter with numerous input ports before. Although the 87v can take inline readings of up to 20 amps for 30 seconds, doing so without first connecting the leads to the amp jack might result in a dead short that would break the meter’s internal fuse and perhaps cause further damage or injury. Thankfully, Fluke has included a lead warning function that will beep loudly and show LEAD on the display if your leads are not in the right position for the measurement option you have selected.

Business technician worth

Any business technician worth their salt needs a multimeter with true RMS as its primary function. Fortunately, the Fluke 87V covers all of these bases as well. The meter’s built-in Touch Hold function is one of my favorite features. This function will preserve the readings on the screen for a few seconds after the probes have been removed. It’s helpful if you’re in an unnatural posture that prevents you from seeing the screen while taking a reading. However, Smooth out erratic signals and keep readings you couldn’t personally see with the help of the Min/Max, Average, and Relative modes. Think about Leaving your amp clamp on the roof’s compressor while you go reset a breaker in the electrical room. The Fluke 87V has an excellent screen. The ability to adjust the illumination to two different intensities is fantastic. One push turns the light on and two presses increase the intensity.

Constructional Integrity and Stylishness

The Fluke 87V is fully American-made from start to finish, and it has a lifetime guarantee. This is a major selling element for me. If I can, I prefer to purchase goods that were manufactured in the United States. However, The IP30 enclosure certification gives the meter a sense of solid construction and makes it seem more robust than its smaller siblings, the 116 and 117. The meter comes with its own protective pouch, a yellow rubberized case that has become instantly recognizable. 

Examine the Fluke 87V max, which has an IP67 Rating, if you believe you are rougher on your equipment and will want extra safeguards. However, With an IP67 classification, dust is completely sealed out, and water immersion up to 1 meter in depth is safe. Safety ratings for the 87V are also rather good, with certifications from respected organizations like CE, CSA, and RCM, and ratings of 1000 V for CAT III and 600 V for CAT IV. However, The Fluke 87V has fuses for both of its circuits. There is a 440mA, 1000-volt rated fuse for the 400mA input, and an 11A, 1000-volt rated fuse for the main 10A circuit.

Read More Click Here

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top